IMAR Products. IMAR Strataglass Protective Polish, IMAR Strataglass Protective Cleaner, and mild soap (preferably) IMAR Yacht Soap Concentrate). Use of harsh cleaners like “Simple Green, Glass cleaners with Ammonia, and Orpine” will dull the curtains quickly. Using any other product(s) void the factory warranty.

303 Clear Vinyl Protective Cleaner is also approved for cleaning of Vinyl panels. 303 Clear Vinyl protectant offers superior protection against the harmful effects of UV rays. This product is all you need to safely clean and protect against yellowing and cracking of vinyl, clear vinyl, leaving a non-streaking finish.

• NEVERuse a wash-and-wax product on Vinyl panels.
• WARNING– Use of Rain-X, Pledge, or Plexus on your Vinyl panels will appear to work for a short time but then dulls the surface and presents an “Orange Peel” effect. Do not use any of these products.
• Use of cleaners, polishes, scratch removers, or any other product made for regular, uncoated vinyl will damage your vinyl panels. Do not use these products.
• DO NOT HANDLE VINYL WITH SUNSCREEN ON YOUR HANDS!This will permanently cloud the vinyl where handled.

For the customer: We recommend using IMAR Strataglass protective Polish or 303 Clear Vinyl Protectant or cleaner every 1 to 2 months.

Note: All new vinyl can easily get impressions. It is recommended new enclosures be left in place to the extent possible. Vinyl “seasons” over time and becomes less impressionable. Roll all curtains down and fasten in place nightly to keep perfect appearance.

Cleaning: Apply the soapy water to the clear vinyl section of the curtain with special purpose washing mitt or soft cotton cloths. Thoroughly rinse the soapy solution with fresh water and completely dry the curtains with a high quality chamois. After washing the curtains, apply 303 or IMAR Strataglass Protective Polish sparingly with small, light circular motions using a soft cotton cloth. Allow the polish to dry and then remove with a clean soft cotton cloth. Finally, lightly buff to a sparkling shine. For routine maintenance between polishing, use IMAR Strataglass Protective Cleaner. Insure the clear vinyl panels are free of abrasives. Very lightly mist a soft cotton cloth. Lightly and briskly rub a manageable sized area and then lightly buff dry with another clean cloth.

Restoring: Some actual damage cannot truly be repaired. If 303 or IMAR Protective Polish cannot restore the clarity and shine, it may be time to consider replacing the enclosures.